Dongguan Forever Co.,Ltd is the manufacture of the China origin cheap UV stablized PC polycarbonate Granules Polymer Resin
C 216 V35 BK Z-XH is an injection-moldable polyamide PA6 compound that is strengthened with 35% glass fiber reinforcement. This grade exhibits impressive mechanical properties and delivers an exceptional balance of thermal and mechanical performance.
General | ||||
Form | Resin Pellets | |||
Usage | Furniture Electrical | White Goods & Small Appliances | Wire & Cable Applications
| |
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.38 g/cm³ | ISO 1183 | ||
Water Absorption(24 hr, 23°C) | 0.9 % | ISO 62 |
Mechanical | Nominal Value | Test Method |
Tensile Modulus 1 mm/min/dry 1 mm/min/conditioned | 11000 MPa 6500 MPa | ISO 527-1/-2 |
Stress at break dry conditioned | 175 MPa 110 MPa | ISO 527-1/-2 |
Strain at break dry conditioned | 3.2 % 7 % | ISO 527-1/-2 |
Flexural Modulus 2 mm/min/dry 2 mm/min/conditioned | 10000 MPa 6500 MPa | ISO 178 |
Flexural Strength 2 mm/min/dry 2 mm/min/conditioned | 300 MPa 155 MPa | ISO 178 |
C harpy Impact Strength, Unnotched dry; 23 ℃ conditioned; 23 | 90 kJ/m² 95 kJ/m² | ISO 179 1eU |
C harpy Notched Impact Strength dry; 23 ℃ conditioned; 23 | 12 kJ/m² 20 kJ/m² | ISO 179 1eA |
Notched Izod Impact Strength dry; 23 ℃ conditioned; 23 | 15 kJ/m² 28 kJ/m² | ISO 180/1A |
Thermal | Nominal Value | Test Method |
Melting Temperature(10°C/min) | 222 °C | ISO 11357-1 |
Temp. of deflection under load(1.8 MPa) | 210 °C | ISO 75 |
Flammability 0.75 mm 1.5 mm 3 mm | HB HB HB | UL 94 |
Glow-Wire Flammability, GWFI(1.5 mm) | 650 °C | IEC 60695-2-12 |
Electrical | Nominal Value | Test Method |
Volume Resistivity | 1E+11 ohms ·cm | IEC 62631-3-1 |
Surface Resistivity | 1E+014 Ohms | IEC 62631-3-1 |
Comparative Tracking Index(Solution A) | 400 V | IEC 60112 |
Processing | Nominal Value | |
Drying Temperature(除湿干燥机) | 80 °C | |
Drying Time(除湿干燥机) | 2 - 4 h | |
Suggested Max Moisture | 0.2 % | |
Rear Temperature | 230 - 235 °C | |
Middle Temperature | 235 - 240 °C | |
Front Temperature | 240 - 250 °C | |
Blow Molding Mold Temperature | 60 - 90 °C |