High Quality Factory Resin Polymer Heat Stabilized PA6 Nylon Polyamide Particles
Dongguan Forever Co.,Ltd is the manufacture of the China origin cheap UV stablized PC polycarbonate Granules Polymer Resin
PROTECT A 20 V35 BK 25-XH is a flame retardant polyamide 6, reinforced with 35% glass fiber and heat stabilized,
specifically designed for injection molding applications. It meets the stringent UL 94 V-0 flame retardant rating
while also exhibiting excellent mechanical properties.
This grade is specifically suited for the production of
insulating parts for electrical devices, as well as thin parts exposed to stress.
General | |
Form | |
Filler | |
Uses | |
Physical Nominal Value Test Method | |
Density / Specific Gravity 1.46 g/cm³ ISO 1183 | |
Water Absorption(24 hr, 23°C) 0.6 % ISO 62 | |
Molding shrinkage, parallel(72 hr, 23°C, 50% RH) 0.25 % | ISO 294-4, ISO 2577 |
Molding shrinkage, normal(72 hr, 23°C, 50% RH) 1 % | ISO 294-4, ISO 2577 |
Resin PelletsMechanical | Nominal Value | Test Method |
Tensile Modulus 1 mm/min/dry 1 mm/min/conditioned | 12500 MPa 8200 MPa | ISO 527-1/-2 |
Stress at break dry conditioned | 175 MPa 110 MPa | ISO 527-1/-2 |
Strain at break dry conditioned | 2.1 % 3.2 % | ISO 527-1/-2 |
Flexural Modulus 2 mm/min/dry 2 mm/min/conditioned | 11000 MPa 7500 MPa | ISO 178 |
Flexural Strength 2 mm/min/dry 2 mm/min/conditioned | 260 MPa 200 MPa | ISO 178 |
C harpy Impact Strength, Unnotched dry; 23 ℃ conditioned; 23 -30 ℃ | 60 kJ/m² 70 kJ/m² 55 kJ/m² | ISO 179 1eU |
C harpy Notched Impact Strength dry; 23 ℃ conditioned; 23 -30 ℃ | 10 kJ/m² 12 kJ/m² 8 kJ/m² | ISO 179 1eA |
Unnotched Izod Impact Strength(23 ℃) | 10 kJ/m² | ISO 180/1U |
Notched Izod Impact Strength(23 ℃) | 12 kJ/m² | ISO 180/1A |
Thermal | Nominal Value | Test Method |
Melting Temperature(10°C/min) | 263 °C | ISO 11357-1 |
Temp. of deflection under load(1.8 MPa) | 244 °C | ISO 75 |
Flammability 0.75 mm 1.5 mm 3 mm | V-0 V-0 V-0 | UL 94 |
Glow-Wire Flammability, GWFI 0.75 mm 1.5 mm 3 mm | 960 °C 960 °C 960 °C | IEC 60695-2-12 |
Glow Wire Ignition Temperature [GWIT](1.5 mm) | 725 °C | IEC 60695-2-13 |
Oxygen Index | 31 % | |
Electrical | Nominal Value | Test Method |
Volume Resistivity | 1E+11 ohms ·cm | IEC 62631-3-1 |
Surface Resistivity | 1E+014 Ohms | IEC 62631-3-1 |
Comparative Tracking Index(Solution A) | 400 V | IEC 60112 |
Dielectric Strength(1 mm) | 32 kV/mm | IEC 60243-1 |
Processing | Nominal Value | |
Drying Temperature | 80 °C | |
Drying Time | 2 - 4 h | |
Suggested Max Moisture | 0.2 % | |
Rear Temperature | 265 - 275 °C | |
Middle Temperature | 270 - 280 °C | |
Front Temperature | 280 - 290 °C | |
Mould Temperature<Injection> | 60 - 90 °C |
