Injection Molding Grade Engineer Plastic PBT Resin GF30 Plastic Raw Materials
Dongguan Forever Co.,Ltd is the manufacture of the China origin cheap UV stablized PC polycarbonate Granules Polymer Resin
The WF0061iQ-XH compound is made from Poly butylene terephthalate (PBT) resin using ELCRIN iQ upcycling technology, which incorporates a minimum of 25% Post-Consumer Recycling (PCR) weight content and 30% glass fiber. This grade offers additional advantages such as being Non-Chlorinated, Non-Brominated Flame Retardant, having a UL94V0 and 5VA Flame Rating, and displaying excellent chemical resistance. It is an ideal option for various applications that require a more sustainable flame retardant (FR) and PBT solution.
General | ||||
Form | Resin Pellets | |||
Filler | 30 % Glass Fiber | |||
Feature | Good Hardness 25 % Pcr | Non-Brominated & Non- Chlorinated Flame Retardant | ||
Chemical Resistant Non-Chlorinated |
| |||
Uses |
|
| ||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.56 1.56 g/cm³ | ASTM D792 ISO 1183 | ||
Water Absorption(23 °C;saturated) | 0.23 % | ISO 62-1 | ||
Moisture Absorption(50% RH;23 °C) | 0.09 % | ISO 62 | ||
Melt Volume Rate, MVR(5 kg;MVR at 250 °C) | 16 cm³/10 min | ISO 1133 | ||
Mechanical | Nominal Value | Test Method |
Izod Impact, Unnotched | ||
23 °C | 570 J/m | ASTM D4812 |
80*10*4;23 °C | 37 kJ/m² | ISO 180/1U |
Izod Impact, Notched | ||
23 °C | 72 J/m | ASTM D256 |
-30 °C | 55 J/m | ASTM D256 |
80*10*4;23 °C | 7 kJ/m² | ISO 180/1A |
80*10*4;-30 °C | 6 kJ/m² | ISO 180/1A |
Instrumented Dart Impact, Total Energy(23 °C) | 6 J | ASTM D3763 |
Tensile Stress, Yield | ||
5 mm/min;Type I | 105 MPa | ASTM D638 |
5 mm/min | 108 MPa | ISO 527 |
Tensile Stress, Break | ||
5 mm/min;Type I | 105 MPa | ASTM D638 |
5 mm/min | 108 MPa | ISO 527 |
Tensile Strain, Yield | ||
5 mm/min;Type I | 2 % | ASTM D638 |
5 mm/min | 2 % | ISO 527 |
Tensile Strain, Break | ||
5 mm/min;Type I | 2 % | ASTM D638 |
5 mm/min | 2 % | ISO 527 |
Tensile Modulus | ||
5 mm/min | 1.1E+04 MPa | ASTM D638 |
1 mm/min | 1.1E+04 MPa | ISO 527 |
Flexural Stress, Yield | ||
1.3 mm/min;50 mm;span | 165 MPa | ASTM D790 |
2 mm/min | 175 MPa | ISO 178 |
Flexural Stress, break | ||
1.3 mm/min;50 mm;span | 165 MPa | ASTM D790 |
2 mm/min | 175 MPa | ISO 178 |
Flexural Modulus | ||
1.3 mm/min;50 mm;span | 9600 MPa | ASTM D790 |
2 mm/min | 1.0E+04 MPa | ISO 178 |
Thermal | Nominal Value | Test Method |
UL Recognized ≥ 0.8 mm ≥ 3 mm | V-0 5VB | UL 94 |
Glow Wire Ignition Temperature [GWIT] 3 mm 1.5 mm 0.8 mm | 800 °C 775 °C 750 °C | IEC 60695-2-13 |
Glow Wire Flammability Index 3 mm 1.5 mm 0.8 mm | 960 °C 960 °C 960 °C | IEC 60695-2-12 |
Heat Deflection Temperature[HDT], Unannealed 3.2 mm;1.82 MPa 0.45 MPa;3.2 mm | 200 °C 214 °C | ASTM D648 |
CTE, Flow(-40 - 40 °C) | 2.4E-05 1/°C | ASTM E831 |
CTE, XFlow(-40 - 40 °C) | 8.0e-05 1/°C | ASTM E831 |
Ball Pressure Test(125°C +/- 2°C) | PASSES | IEC 60695-10-2 |
Relative Temp Index, Elec | 75 °C | UL 746B |
Relative Temp Index, Mechanical with Impact | 75 °C | UL 746B |
Relative Temp Index, Mechanical without Impact | 75 °C | UL 746B |
Electrical | Nominal Value | Test Method |
Hot-wire Ignition, HWI ≥ 0.8 mm ≥ 3 mm | PLC 1 PLC 0 | UL 746A |
High Amp Arc Ignition, HAI( ≥ 0.8 mm) | PLC 0 | UL 746A |
Comparative Tracking Index | 600 V | IEC 60112 |
